Development of Low-Cost 3D Printing Bi-Axial Pressure Sensor

Authors

    Heonsoo Choi, Joonseong Yeo, Jihun Seong, Hyunjin Choi Department of Human Intelligence Robot Engineering, Sangmyung University, Cheonan, Republic of Korea Department of Human Intelligence Robot Engineering, Sangmyung University, Cheonan, Republic of Korea Department of Human Intelligence Robot Engineering, Sangmyung University, Cheonan, Republic of Korea Department of Human Intelligence Robot Engineering, Sangmyung University, Cheonan, Republic of Korea

Keywords:

Pressure sensor, 2-axis force sensor, 3D printer

Abstract

As various mobile robots and manipulator robots have been commercialized, robots that can be used by individuals in their daily lives have begun to appear. With the development of robots that support daily life, the interaction between robots and humans is becoming more important. Manipulator robots that support daily life must perform tasks such as pressing buttons or picking up objects safely. In many cases, this requires expensive multi-axis force/torque sensors to measure the interaction. In this study, we introduce a low-cost two-axis pressure sensor that can be applied to manipulators for education or research. The proposed system used three force-sensitive resistor (FSR) sensors and the structure was fabricated by 3D printing. An experimental device using a load cell was constructed to measure the biaxial pressure. The manufactured prototype was able to distinguish the +-x-axis and the +-y-axis pressures.

References

Grosu V, Grosu S, Vanderborght B, et al., 2017, Multi-Axis Force Sensor for Human-Robot Interaction Sensing in a Rehabilitation Robotic Device. Sensors, 17(1): 1294. https://doi.org/10.3390/s17061294

Jeong Y-S, Lee C-S, 2018, External Force Estimation by Modifying RLS using Joint Torque Sensor for Peg-in-Hole Assembly Operation. The Journal of Korea Robotics Society, 13(1): 55–62. https://doi.org/10.7746/jkros.2018.13.1.055

Kim H-S, Kim G-S, 2017, Development of Calf Link Force Sensors of Walking Assist Robot for Leg Patients. Journal of Sensor Science and Technology, 26(2): 114–121. https://doi.org/10.5369/JSST.2017.26.2.114

Wu B, Luo J, Shen F, et al., 2011, Optimum Design Method of Multi-Axis Force Sensor Integrated in Humanoid Robot Foot System. Measurement, 44(9): 1651–1660. https://doi.org/10.1016/j.measurement.2011.06.013

Lee K-J, Kim H-M, Kim G-S, 2016, Design of Smart Three-Axis Force Sensor. Journal of Institute of Control, Robotics and Systems, 22(3): 226–232. https://doi.org/10.5369/JSST.2016.25.2.110

Wasserfall F, Hendrich N, Fiedler F, et al., 2017, 3D-Printed Low-Cost Modular Force Sensors. Human-Centric Robotics: 485–492. https://doi.org/10.1142/9789813231047_0059

Hendrich N, Wasserfall F, Zhang J, 2020, 3D Printed Low-Cost Force Torque Sensors. IEEE Access, 8: 140569–140585. https://doi.org/10.1109/ACCESS.2020.3007565

Kim K, Park J, Suh J-H, et al., 2017, 3D Printing of Multiaxial Force Sensors Using Carbon Nanotube (CNT)/Thermoplastic Polyurethane (TPU) Filaments. Sensors and Actuators A Physical, 263: 493–500. https://doi.org/10.1016/j.sna.2017.07.020

Mayetin U, Kucuk S, 2021, A Low Cost 3-DOF Force Sensing Unit Design for Wrist Rehabilitation Robots. Mechatronics, 78: 102623. https://doi.org/10.1016/j.mechatronics.2021.102623

Chathuranga DS, Wang Z, Noh Y, et al. IROS 2016 – IEEE/RSJ International Conference on Intelligent Robots and Systems, October 9–14, 2016: A Soft Three Axis Force Sensor Useful for Robot Grippers. 2016, Daejeon. https://doi.org/10.1109/IROS.2016.7759817

Viry L, Levi A, Totaro M, et al., 2014, Flexible Three-Axial Force Sensor for Soft and Highly Sensitive Artificial Touch. Advanced Materials, 26(17): 2659–2664. https://doi.org/10.1002/adma.201305064

Kim S-J, Choi J-Y, Moon H-P, et al., 2016, Development of Polymer Slip Tactile Sensor Using Relative Displacement of Separation Layer. The Journal of Korea Robotics Society, 11(2): 100–107. https://doi.org/10.7746/jkros.2016.11.2.100

Song K, 2020, HASEL Actuator Study for Tactile Feedback Device. The Journal of Korea Robotics Society, 16(1): 12–16. https://doi.org/10.7746/jkros.2021.16.1.012

Vogt DM, Park Y-L, Wood RJ, 2013, Design and Characterization of a Soft Multi-Axis Force Sensor Using Embedded Microfluidic Channels. IEEE Sensors Journal, 13(10). https://doi.org/10.1109/JSEN.2013.2272320

Kim K, Ahn J, Jeong Y, et al., 2021, All-Soft Multiaxial Force Sensor Based on Liquid Metal for Electronic Skin. Micro and Nano Syst Lett, 9(2). https://doi.org/10.1186/s40486-020-00126-9

Y Mengüç, Park Y-L, Pei H, et al., 2014, Wearable Soft Sensing Suit For Human Gait Measurement. The International Journal of Robotics Research, 33(14). https://doi.org/10.1177/0278364914543793

Choi H, Kong K, 2019, A Soft Three-Axis Force Sensor Based on Radially Symmetric Pneumatic Chambers. IEEE Sensors Journal, 19(13). https://doi.org/10.1109/JSEN.2019.2904606.

Downloads

Published

2023-12-31